Naim NDX2

€ 7.095,00

Op het eerste gezicht lijkt er weinig veranderd aan de NDX, maar wij zien dat als een groot voordeel! De NDX 2 past naadloos in je bestaande NAIM Classic systeem maar dat wel met de laatste techniek onder de behuizing.

Het grote kleurenscherm laat al zien dat je met de NDX 2 te maken hebt. Het scherm is van smartphone kwaliteit en heeft een hoge resolutie om albumhoezen haarscherp te kunnen tonen. Van binnen is de NDX 2 voorzien van het nieuwe NP800 streamingboard met 40-bit SHARC processor voor het verwerken van hoge resolutie bestanden zoals DSD128 of PCM 32bit/384kHz.

Ook is de interne verwerkingssnelheid flink hoger dankzij LVDS. Het zorgt voor een snellere overdracht van data maar geeft ook minder ‘noise’ in de behuizing. Hierdoor klinkt alles veel schoner en houdt je simpelweg meer muziek over om naar te luisteren.

De DAC in de NDX 2 is van hoge kwaliteit. NAIM zorgt ervoor dat het binnenkomende digitale signaal opnieuw geklokt wordt voor een betere timing. Het gehoor is hier bijzonder gevoelig voor en het zorgt ervoor dat de beleving van muziek op een hoger niveau komt te staan. Overigens kan de geluidskwaliteit van andere apparatuur worden verbeterd door het digitale signaal via de NDX 2 te laten verlopen.

 

De NDX 2 biedt je zelfs de mogelijkheid om op een later tijdstip de kwaliteit nog verder te verbeteren door middel van een losse voeding. Deze upgrade zet de ingebouwde voeding buitenspel, een grotere voeding zorgt ervoor dat de interne componenten nog beter hun werk kunnen doen. Daarnaast zijn de componenten nog beter afgeschermd door elektromagnetische straling omdat de voeding nu extern is geplaatst. Je kunt hiervoor de XPS DR gebruiken of de nog zwaardere PS 555 DR voeding.

De bediening kan middels de bijgeleverde afstandsbediening of via de uitstekend werkende NAIM app voor iOS en Android.

  • UPnP-enabled to allow streaming of audio files at up to 32bit/384kHz resolution from Naim Audio hard disk servers, network-attached storage (NAS) devices or any home computer
  • Supports a broad range of music formats: WAV, FLAC, DSD, Apple Lossless, AIFF, AAC, Windows Media-formatted files, M4A and MP3. Gapless playback on all file formats
  • Four 24bit/192kHz capable digital inputs (S/PDIF) to support optimum connection to external sources
  • 5” colour display presenting album artwork as well as track information
  • Built-in Chromecast allows you to stream from hundreds of supported smartphone or tablet apps (192kHz)
  • Apple AirPlay - stream music from your iOS device or from iTunes and Apple Music
  • Spotify Connect built-in to stream millions of songs from the world’s most popular streaming service
  • Native support for TIDAL streaming service with free 90 day trial of lossless HiFi tier
  • Front-panel USB port for replay of MP3 player and USB-stored audio (1.6A charge)
  • vTuner 5* full-service internet radio
  • Multiroom & Party Mode compatible
  • iOS and Android Naim Audio app for intuitive control
  • Bluetooth connectivity with aptX HD codec for quality audio playback
  • Thanks to RC5 system integration, you can control compatible amplifiers that are connected to your network player directly from the Naim app on a phone or tablet.
  • Bi-directional, Zigbee®-compatible remote control
  • Roon ready - turning your music collection into a beautifully laid out catalogue

Technology & Craft

 

The Burr-Brown® PCM1792A digital-to-analogue converter working alongside our new streaming platform is one of the best available. We improved its performance even further by implementing our own digital filters and adding a discrete current-tovoltage converter immediately after the DAC.

The streaming section of the NDX 2 uses the latest Naim network card featuring lownoise, high-speed low-voltage differential signalling (LVDS) to route the digital audio signal. The higher speed is capable of decoding all HD audio formats at up to 32 bits/384 kHz or DSD128. Rather than the source acting as the digital timing master, our new streaming board turns things around and allows our DAC clock to control the flow of audio data. The data is integer-over-sampled in a SHARC DSP to an incredible 40-bit accuracy before it’s fed to the Burr-Brown DAC.

The NDX 2 features an integrated low-noise power supply with a custom-designed toroidal transformer and separate windings for the digital and analogue sections. However, the player can be upgraded with an external XPS DR or 555 PS DR power supply, giving you a marked increase in sonic authority and emotion.

During the development of the NDX 2, our engineers examined every detail, from mechanical construction, component selection and board layout. The result is a network player worthy of the Naim badge, with a sound that’s rich, detailed and engaging.

Audio InputsStreaming

Chromecast built-in, Apple AirPlay, TIDAL, Spotify® Connect, Bluetooth (AptX HD), Internet Radio, UPnP™ (hi-res streaming), Roon Ready

USB

2 x USB Type A socket (front and rear - 1.6A charge)

Digital (S/PDIF)

2 x Optical TOSLink (up to 24bit/96kHz)
1 x coaxial RCA (up to 24bit/192kHz, DoP 64Fs)
1 x coaxial BNC (up to 24bit 192kHz, DoP 64Fs)

Audio OutputsAnalogue

1 x RCA pair
1 x 5-pin DIN

ConnectivityUpdates

Update your system wirelessly via the Naim app

Network

Ethernet (10/100Mbps), WiFi (802.11 b/g/n/ac with external antennae)

FormatsMultiroom

Party Mode Streaming: Sync up to six Naim products and control via the Naim app

Internet Radio Formats

Windows Media-formatted content, MP3, ACC, OGG Vorbis streams and MMS

Internet Radio Provider

vTuner premium 5*

Audio Formats

WAV - up to 32bits/384kHz
FLAC and AIFF - up to 24bit/384Hz
ALAC (Apple Lossless) - up to 24bit/384Hz
MP3 - up to 48kHz, 320kbit (16 bit)
AAC - up to 48kHz, 320kbit (16 bit)
OGG and WMA - up to 48kHz (16 bit)
DSD - 64 and 128Fs
M4A - up to 48kHz, 320kbit (16 bit)
Note: Gapless playback supported on all formats.

PhysicalDimensions

87mm x 432mm x 314mm (H x W x D)

Finishes

Brushed and anodised aluminium

Weight

10kg

PowerPower Consumption

Typical use: 19W
Network standby mode: <2W
Deep sleep: <0.5W

Ripping and StorageStorage

2 x USB Type A socket (front and rear - 1.6A charge)

Supplied withSupplied with

Zigbee® remote (inc. batteries), Power-Line Lite cable (UK denominations only), Burndy link plug, 5-pin DIN interconnect cable, BNC to RCA adaptor, Wi-Fi (x2) and Bluetooth antennae, cleaning cloth, quick start guide

UpgradesMains Cable

Power-Line

Power Supply

555 PS DR/ XPS/ XP5 XS

Other

Super Lumina / Hi-Line

User ControlApp Control

Naim App for iOS and Android

Front Panel

5" colour LCD display and four buttons

Handheld

Zigbee® RF4CE